Rust Guide - All CCTV IDs

To access cameras, you’ll need to find or craft a computer station. Then add the desired codes inside the station, no power is required for the computer station.

For Rust+ cameras, go to the cameras tab and enter the desired codes. You have to be logged-out of the server to access the feed through Rust+.

Extra notes
- No Signal is displayed when an incorrect camera code was entered or that the camera does not exist.
- Weak Signal is displayed when the camera is disabled (no power).

Note: these codes are dynamic and different on every server, you will need to replace **** with random numbers that regenerate at every wipe.

You can locate the full codes in the Abandoned Military Base, inside the cctv/communications tent.

• COMPOUND****
  
• OUTDOOR****

Note: these codes are dynamic and different on every server, you will need to replace **** with random numbers that regenerate at every wipe.

You can locate the full codes in the Underwater Labs, inside the CCTV room, which is found behind a key card puzzle room. Not all codes will always appear, as they vary by lab layout.

• CAPTAINQUARTER****
  
• CREWQUARTERS****
  
• SECURITYHALL****
  
• LOCKERROOM****
  
• TECHCABINET****
  
• OPERATIONS****
  
• AUXPOWER****
  
• CLASSIFIED****
  
• INFIRMARY****
  
• HALLWAY****
  
• CANTINA****
  
• BRIG****
  
• LAB****